IoT in the Design Space

The Design spaces have a special WiFi network set up just for IoT (Internet of things) devices.

This network is basically an isolated “sandbox” type setup where devices can connect to the internet or other devices on this network only. It only requires a single PSK (Pass-key / password) to connect so most devices should be able to connect.

The Pass-key / password is reset regularly by IT and is not as fast as the other UoA WiFi networks so only use it for IoT development. But a computer can be connected to the network to communicate with a device if needed.


The current settings for the network are below:

the SSID = UoA-Design

the PSK = UoA_D3s1gn

Leave a Reply

Your email address will not be published. Required fields are marked *